Shimano Talica 20BFC 

Because of its extraordinary quality, the shimano talica name is the best baitcasting reel all over the globe. The brand-new shimano talica 20 BFC best baitcasting reel will turn all of your greatest aspirations and wishes into a reality, and it will do it quicker than you ever thought possible. It was built from the ground up to satisfy the most rigorous specifications needed by the professional billfish tournament circuit during the whole process of designing and constructing the competition boat. 

First, the ultra-high speed with a line retrieval of sixty feet with each crank and a minimum of three pounds of drag applied at the strike to prevent the line from slipping off—the ultra-high speed with a line retrieval of sixty feet with each crank. Next, breakneck speed and the line retrieve at sixty feet for every turn of the crank. Think about using this technologically sophisticated instrument in the competitive fishing scene to boost your chances of getting an edge over other anglers.

Shimano Talica High-Efficiency Gearing

The best baitcasting reel “Shimano Talica 20BFC” structure, set plate, and handle-side side plate are all components in the handle-end gearbox (HEG) and the gears. To give more leverage and power, we expanded the driving gear and the pinion gear to the sizes they had been when they were first manufacturers. As a result, we have decreased the amount of flex in the drivetrain, which is the factor that causes ordinary gears to bind when there is a significant amount of load placed on them—using a one-piece frame that incorporates the set plate and a one-piece coined side plate was a necessary step in achieving this goal.

Because we have reduced the amount of flex in the system and increased the amount of leverage, we can now deliver high-speed retrieves and generate an astonishing level of torque. All this achieves without compromising the silky smoothness and near-silent operation of the retrieve that has helped make Shimano reels so popular. 

Shimano Talica S A-RB Bearings

Those bearings process similarly to our A-RB paths but also have shields on both sides of the directions. Because of these shields, there is less of a chance that sand or salt may hinder the bearing from spinning correctly.

Cold Forged Aluminum Spool

Compared to spools made of diecast metal or graphene, these spools provide superior strength and longevity.

Based on the fish that I have reeled in with my Shimano Talica 20 II this year, I will write a brief evaluation of the reel. The only difference between the 25 and the 20 is that the spool on the 20 is much smaller than the spool on the 25. In addition, the Talica 20, 25, and 50 are the only models in this series equipped with harness lugs.

When canyon fishing, you should always have one of these on hand because you never know when a 250-pound eyeball may show up, and when it does, you can expect a battle that endures for more than two hours. On this specific reel of mine, I could load up 500 yards of JB60 in addition to a top shot of 100 yards of 80-pound Momoi Diamond (both the hollow core and mono top shot have a breaking strength of well over 90 lbs).

Shimano Talica 20BFC

My first impression of the arrangement was that it appeared lightweight. When I say “best baitcasting rod and reel combo light,” I mean something unusual for an offshore big game setup. However, after adjusting the drag to 18 pounds and doing a few tests pulls with the rod, I concluded that the weight had no impact on the strength and backbone of this rig. It could not compete well among 50 wides. The free spool had no visible strain; thus, I could backcast a reasonably lightweight bait without meeting any opposition. Shimano Talica has created a “billfish” version of their Talica reel, with an extremely high ratio retrieve and just one gear. Because I fish for tuna most of the time, I decided that this particular reel was not for me and instead went with the 20 two-speed.

Shimano Talica Guide

We couldn’t believe how quickly I was able to land the fish; I was ecstatic! I wasn’t wearing a belt or a harness, and despite that, I had the impression that I could spend hours battling a fish while holding onto that rod. Fight freestyle was a breeze thanks to the smoothness of the reel, the free spool, and the weight of the rod.

After some time, I determined to test my new lightweight sharking gear by attempting to catch sharks. After a few hours, nothing exciting happened; I finally got the perfect bite. After the Shimano Talica began releasing drag, I prepared my gear, moved the drag lever up, and gave this shark free reign over the situation. The fishing rod and reel worked well when setting the hook, and the rod had the ideal amount of backbone to drive the pin deep into the fish’s mouth. After that, I relaxed for what I anticipated would be a difficult battle against the fish. However, after a minute and a half, a thresher shark weighing 120 pounds began breaching behind the boat and making blazing-fast runs straight at me.

I could use high-speed retrieval and maintain a tight line, extending the battle duration. After 5 minutes, the fight continued below the boat in a give-and-take fashion. I quickly transitioned to a low speed, and the winching started. I brought the fish to the surface with little effort and without needing a harness or belt. After waiting twenty minutes, I greeted the fish as they approached my boat with the flier. 120-pound Thresher successfully secured!


My first thoughts on the reel were that it had a very silky feel, was relatively lightweight, and packed much punch. None of those perspectives changed after a few times using the trip, either. That Shimano Talica reel has the ability of a 50w but is about the same weight as a bass reel. As a result of utilizing it with others, we have all decided to convert to more compact, less heavy, and more powerful configurations. No longer will you need to struggle against the tackle and end up with jelly arms. 

I am more confident that this reel (Shimano Talica 20 II) will handle any fish you may come across in these waters, and it can do so without straining your whole body attempting to hold a 20-pound line with an 80-pound-test roller guide setup. These reels provide a comfortable striking drag of 30 pounds and a maximum drag of 45 when fully loaded. That is MORE than plenty for most fishermen, as we only utilize 22 pounds of drag while canyon fishing on either of our 30/50w rigs.